The second generation PC210LCi-11 is productive and precise enough to be a fixture on jobsites from basement and foundation pads to utility work. Featuring factory integrated 3D GNSS technology, and improved machine control performance, the PC210LCi-11 empowers operators to dig straight to grade, faster. Minimizing over-excavation and bedding material, this machine leaves behind nothing but clean and accurate grade.
Intelligent Machine Control excavator with semi-automatic control allows the operator to improve work efficiency as compared to conventional aftermarket machine guidance (indicate only) or manual operation. Rough digging to finish grading, intelligent Machine Control minimizes over-excavation to make every pass count.
With the auto grade assist function, the operator moves the arm, the boom adjusts the bucket height automatically, tracing the target surface and minimizing digging too deep. This allows the operator to perform rough digging without worrying about the design surface, and to perform fine digging by operating the arm lever only. The working range is expanded by holding the lever to move the boom downward.
During boom or bucket operation, the work equipment automatically stops when the bucket edge reaches the design surface, thus minimizing damage to the design surface.
The intelligent Machine Control excavator controls the bucket by automatically selecting the point on the bucket closest to the target surface. Should the machine not be facing a sloped surface at a right angle, it will still follow the target surface and minimize digging below it.
165 @ 2000 rpm
0.89 -02.56 yd3